! Preordering of the SDCard HxC Floppy Emulator !
Remeber to upgrade You software if You have older versionlolafg wrote: Recived mine today in a nice box , really great hardware !!
Thanks again!!
anyway, next batch
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0501148442
I have 40 to solder more, 50 is being tested and packed...so, almost finish
NEW PCBS will be BLACK
..... Atari Roxxx !!!
Just a quick note: My SDCard HxC arrived yesterday and works perfectly (thanks!). It already contained the right firmware version. However finding the needed hxcsdfe.cfg was very hard. The manual mentions that I need to copy this file to the SDCard first to make it work, but does not provide a link. I could not find the file in the download section either. I downloaded converter source and prototype firmware in hope for this file. The prototype firmware contained it, but an old version that would not work. I had to go to the forum, find this thread and download the firmware 1.1.0.1 from above link to finally get it working.Jeff wrote: ok, this is an old and buggy version. you need to update it :
https://hxc2001.com/floppy_drive_emulat ... _1_0_1.zip
May I suggest:
- Putting the current firmare version in the download section
- Mentioning that you need to download this to get the config file.
- Or alternatively putting the config file for download seperately, or distributing it with the converter software
regards,
nurgle, a happy SDCard HxC user on Schneider (Amstrad) CPC 6128.
You can generate it with the windows software (HxCFloppyEmulator.exe).nurgle wrote:Just a quick note: My SDCard HxC arrived yesterday and works perfectly (thanks!). It already contained the right firmware version. However finding the needed hxcsdfe.cfg was very hard. The manual mentions that I need to copy this file to the SDCard first to make it work, but does not provide a link. I could not find the file in the download section either. I downloaded converter source and prototype firmware in hope for this file. The prototype firmware contained it, but an old version that would not work. I had to go to the forum, find this thread and download the firmware 1.1.0.1 from above link to finally get it working.Jeff wrote: ok, this is an old and buggy version. you need to update it :
https://hxc2001.com/floppy_drive_emulat ... _1_0_1.zip
May I suggest:
- Putting the current firmare version in the download section
- Mentioning that you need to download this to get the config file.
- Or alternatively putting the config file for download seperately, or distributing it with the converter software
regards,
nurgle, a happy SDCard HxC user on Schneider (Amstrad) CPC 6128.
Bonsoir,
Je vais m'exprimer en Français car mon anglais est trop mauvais.
J'ai reçu le HxC SD hier .
J'ai rencontré deux problèmes tout d'abord en insérant ma carte SD Sandisk 2gb formatée en fat32 l'afficheur m'indique qu'elle n'est pas présente.
En la formatant en fat la carte est détectée mais me demande le fichier SDHXCFE.CFG alors que j'ai copié le fichier HXCSDFE.CFG sur la carte comme indiqué sur la documentation.
Mon Firmware est le V1.1.0.1
Que dois je faire ?
Merci.
Je vais m'exprimer en Français car mon anglais est trop mauvais.
J'ai reçu le HxC SD hier .
J'ai rencontré deux problèmes tout d'abord en insérant ma carte SD Sandisk 2gb formatée en fat32 l'afficheur m'indique qu'elle n'est pas présente.
En la formatant en fat la carte est détectée mais me demande le fichier SDHXCFE.CFG alors que j'ai copié le fichier HXCSDFE.CFG sur la carte comme indiqué sur la documentation.
Mon Firmware est le V1.1.0.1
Que dois je faire ?
Merci.
Le formatage doit être en FAT32 et non pas en FAT.fabu wrote:Bonsoir,
Je vais m'exprimer en Français car mon anglais est trop mauvais.
J'ai reçu le HxC SD hier .
J'ai rencontré deux problèmes tout d'abord en insérant ma carte SD Sandisk 2gb formatée en fat32 l'afficheur m'indique qu'elle n'est pas présente.
En la formatant en fat la carte est détectée mais me demande le fichier SDHXCFE.CFG alors que j'ai copié le fichier HXCSDFE.CFG sur la carte comme indiqué sur la documentation.
Mon Firmware est le V1.1.0.1
Que dois je faire ?
Merci.
Yes why not ?lotharek wrote:Jeff, we decided with wife to visit Paris with car - how about bottle of wine by Sequane ?
btw: You have some amusemnt parks over there for kids ? Disneyland or sth ??
Regarding the parks:
http://www.disneylandresortparis.pl/?c=PL-EN
http://www.parcasterix.fr/
http://www.ticketobserver.fr/