New Slim/cost reduced SD HxC Floppy Emulator !

General information and announcements - please read it first before posting.
Sorgelig
Posts: 3
Joined: Thu Oct 20, 2016 1:00 pm

Re: New Slim/cost reduced SD HxC Floppy Emulator !

Post by Sorgelig » Sun Oct 23, 2016 1:41 pm

Can you adjust the display info?
Because many disk names are very long and number in multi-disk games somewhere in the end, it's not visible and it's impossible to tell which disk number is selected. Yes you can count beeps, but it's not easy if game/app has more than 4 disks.

How about to add disk slot in the beginning of second line on display? There are 3 empty places there, so at least 2 least digits of disk number can be displayed. This place can be shared with other info (i see A, RA there) - so if no other info displayed there, then disk number can be shown there.

This would be very handy!

another_SD1
Posts: 25
Joined: Sat Sep 26, 2015 11:48 am

Re: New Slim/cost reduced SD HxC Floppy Emulator !

Post by another_SD1 » Sat Feb 04, 2017 1:29 pm

Thank you for the beta. It works for me too, I did a quick test.
Now I have to figure out how to fit the lcd and the hxc-slim in the case together... At least the height of the space for floppy drive on the ensoniq sd1 is higher than usual.
2017-02-04 12.52.10-1.jpg
2017-02-04 12.52.10-1.jpg (88.73 KiB) Viewed 678 times

oscarbraindead
Posts: 2
Joined: Sat May 25, 2013 5:04 pm

Re: New Slim/cost reduced SD HxC Floppy Emulator !

Post by oscarbraindead » Wed Feb 15, 2017 3:48 pm

Hi all,
I'm thinking about add a lcd to my slim. My solder skills are near to null, i'd to know if is there any way to do it without soldering? In the pictures I can see some plastic pieces attached to the slim board... are soldering required too with these plastic pieces?

Thanks in advance.

another_SD1
Posts: 25
Joined: Sat Sep 26, 2015 11:48 am

Re: New Slim/cost reduced SD HxC Floppy Emulator !

Post by another_SD1 » Mon Feb 20, 2017 11:24 am

Hi Oscar.
I did just a test, I used some test wires to see that it works.
When I'll mount it, for sure I will have to solder the wires there, o a small 5-pin connector.

Better find someone willing to help you with the soldering.
Otherwise you could fit there wires stucked with tooth sticks ... but I really don't recommend this. :)

oscarbraindead
Posts: 2
Joined: Sat May 25, 2013 5:04 pm

Re: New Slim/cost reduced SD HxC Floppy Emulator !

Post by oscarbraindead » Tue Feb 21, 2017 1:52 pm

Hi another_SD1.

I'll try to find somebody near to me in order to make the mod. Im very interested on it.
Thanks for your advice.
Best regards.

another_SD1
Posts: 25
Joined: Sat Sep 26, 2015 11:48 am

Re: New Slim/cost reduced SD HxC Floppy Emulator !

Post by another_SD1 » Wed Feb 22, 2017 8:37 pm

You're welcome. I wish you success with the mod.

Post Reply